 |
| Pattern A |
這是我剛開始學習 amigurumi 的練習作品之一. 這個娃娃的特色是細細的四肢, 所以毛線要用細的來鉤較理想. 基本上作品最後大小會因你使用的鉤針大小及毛線粗細來決定, 可依個人喜好做選擇. 這是我在網路截取的免費織圖, 閱讀英文困難, 可利用右上角語言翻譯器來協助. 對初學者這是有難度的, 不過我鼓勵你們嚐試挑戰, 我也是自學, 事實上不是那麼困難, 就來享受鉤針編織的樂趣吧!!
Lalaloopsy doll 習作 A織圖:
Crochet hook: NO. 3
Cheek (work 2 in lighter pink)
Rnd 1: 6sc in magic ring
Rnd 2: inc around
Rnd 3 : (1sc, inc) around.
Fasten off.
Feet (make 2)
(For the color changes I found that the best results I get from fastening of and starting with new color.
(Starting with pink)
Rnd 1: 7 chain
Rnd 2: starting from a second chain from hook - 5sc, 3sc in one ch, working on the other side of the chain - 5sc, inc
Rnd 3: inc, 4 sc, inc, sc, inc, 5 sc, inc, sc
Rnd 4: 5sc, 4dec, 6sc
Rnd 5: 3sc, 4dec, 4sc
Rnd 6: 4sc, dec, 5sc
Rnd 7- 11: sc around
(Change to white yarn)
Rnd 12-13: sc around
(Change to black yarn)
Rnd 14-15: sc around
(Change to white yarn)
Rnd 16-17: sc around
(Change to black yarn)
Rnd 18-19: sc around
(Change to white yarn)
Rnd 20-21: sc around
(Change to black yarn)
Rnd 22-23: sc around
(Change to white yarn)
Rnd 24-32: sc around
For first leg, join with sl st in first st. Fasten off.
For second leg, do not sl st in first st. Do not fasten off.
Body and head
With white
Rnd 1: Hold legs together. Be sure that both legs are facing right direction. Insert hook in the first leg, pull out the loop from second leg, sc in same st , sc in next stitch (do not count this two stiches, sc in next 9 sts on second leg (mark first st), sc in next 9 sts on first leg. (18)
Rnd 2: sc around
Rnd 3: (2 sc, inc) around
Rnd 4: (3 sc, inc) around
Rnd 5: (4 sc, inc) around
Rnd 6-10: sc around
(Change to pink)
Rnd 11: sc around
Rnd 12: back loops only – sc around
Rnd 13: sc around
(Change to white)
Rnd 14: 4sc, dec
Rnd 15-17: sc around
Rnd 18: 3sc, dec
Rnd 19-23: sc around
Rnd 24: 2 sc, 2 dec
(Change to skin color)
Rnd 25: back loops only – sc around
Rnd 26: dec around
Stuff body and insert q-tip or something like pipe cleaner in the neck.
(Head)
Rnd 27: inc around
Rnd 28: (sc, inc) around
Rnd 29: (2sc, inc) around
Rnd 30: (3sc, inc) around
Rnd 31: (4sc, inc) around
Rnd 32: sc around
Rnd 33: (5sc, inc) around
Rnd 34: sc around
Rnd 35: (6sc, inc) around
Rnd 36: sc around
Rnd 37: (7sc, inc) around
Rnd 38-43: sc around
This is where I sew cheeks on and embroidery the mouth.
(Change to pink)
Rnd 44: sc around
Rnd 45: (7sc, dec) around
Rnd 46: sc around
Rnd 47: (6sc, dec) around
Rnd 48: (5sc, dec) around
Rnd 49: sc around
Rnd 50: (4sc, dec) around
Rnd 51: (3sc, dec) around
Rnd 52: (2sc, dec) around
Stuff the head.
Rnd 53: (sc,dec) around
Rnd 54: dec around.
Skirt
Work in front loops of 12th round of body with head facing toward you. Join with sl st , ch 1, sc in same stitch.
Rnd 1: sc around
Rnd 2: (5sc, in) around
Rnd 3-9: sc around
Rnd 10: front loops only – (6sc, inc) around
Rnd 11: (7sc, inc) around
Rnd 11: (8sc, inc) around
Rnd 12: inc around. Fasten off.
Working in back loops of 10th round of the skirt
Join with sl st , ch 1, sc in same stitch.
Rnd 1-3: sc around
Rnd 4: (2sc, inc) around
Rnd 5: (3sc, inc) around
Rnd 6: (chain 3, sc in next stitch) around.
Fasten off.
Arms (make two)
With skin color
3 in magic ring
Rnd 1: inc around
Rnd 2: sc around
Rnd 3: 3sc, (thumb) chain 3, slip stitch in second chain from hook, slip stitch in next stitch, work sc in remaining 3 stitches.
Rnd 4: (sc, dec) around
Rnd 5: inc around
Rnd 6-22: sc around
With white
Rnd 23: sc around
In front loops only
Rnd 24: 2sc, in next stitch work sc, hdc, hdc, (4 dc in next stitch) two times, in next stitch work hdc, hdc, sc, and finally work 2 sc.
Fasten off. Leave a long tail to sew arms to body.
Hair (pink)
I have worked chains from 15 to 40 stitches and than worked 3 hdc or 3 dc in one chain. Than I insert hook where I wanted the curl, pull the tail through and tie a square knot with both ends. Insert ends in the head.
Hair band and bow (black)
Chain about 20 stitches. It supposed to be long as the pink part of the head is from side to side. Work 5 rows.
Chain 24. Slip stitch to first chain and work 4 rounds. Do not fasten off. Bring the seam of bow on the back, in the middle, than chain 6 and slip stitch it in the first chain. Sew the bow onto the band. Than sew the band onto the head to cover the beginning of the hair.
Sew the buttons on.
 |
| Pattern B |
Lalaloopsy doll 習作 B:
bbreviation,
US terms:
Sc
Single crochet
Dc
Double crochet
Inc
2 sc in one stitch
Sl.St.
Slip stitch
Dec.
decrease, invisible decrease or 2 stitches together
Ch
Chain
Blo
back loops only
Flo
front loops only
Materials
used:
2
mm crochet hook
8
ply cotton yarn in various colors
felt:
black (for eye
lashes and under the button placement)
pink
(cheeks)
Black
embroidery thread for designing the lips
Two
7 mm buttons
Embroidery
and darning needles for sewing up the parts and designing the face
Wire
(for legs and arms – to make them flexible and mobile)
P.T.F.E.
thread seal tape to secure the wire ends
Stuffing
of your choice for the head and body
Finished
size of this doll is 23 cm (9 inches)
Gauge
per 1 inch (2,5 cm): 9stx8rows
Head
In
skin color of your choice:
R1
sc6 in the magic ring (work in continuous round)
R2
Inc6 (12 sts)
R3
*Inc1, sc1* x6 (18 sts)
R4
*Inc1, sc2* x6 (24 sts)
R5
*Inc1, sc3* x6 (30 sts)
R6
*Inc1, sc4* x6 (36 sts)
R7
*Inc1, sc5* x6 (42 sts)
R8
*Inc1, sc6* x6 (48 sts)
R9
*Inc1, sc7* x6 (54 sts)
R10
*Inc1, sc8* x6 (60 sts)
R11
*Inc1, sc9* x6 (66 sts)
R12-R19
sc66 sts
R20
*Dec1, sc9* x6 (60 sts)
R21
*Dec1, sc8* x6 (54 sts)
R22
*Dec1, sc7* x6 (48 sts)
R23
*Dec1, sc6* x6 (42 sts)
R24
*Dec1, sc5* x6 (36 sts)
R25
*Dec1, sc4* x6 (30 sts)
R26
*Dec1, sc3* x6 (24 sts)
R27
*Dec1, sc2* x6 (18 sts)
Begin
stuffing the head. Stuff it nice and firm.
R28
*Dec1, sc1* x6 (12 sts)
Tie
off. Finish stuffing.
Body
Working
on the panties. Choose the color you want panties to be.
R1
sc6 in magic ring (work in continuous round)
R2
Inc6 (12 sts)
R3
*Inc1, sc1* x6 (18 sts)
R4
*Inc1, sc2* x6 (24 sts)
R5
*Inc1, sc3* x6 (30 sts)
R6
*Inc1, sc4* x6 (36 sts)
R7-R9
sc36 sts
Change
color to one you are using for skin.
R10
sc36 sts
R11
*Dec1, sc4* x6 (30 sts)
R12
sc30 sts
R13
*Dec1, sc3* x6 (24 sts)
R14
sc24 sts
R15
*Dec1, sc2* x6 (18 sts)
R16
sc18 sts
At
this point begin stuffing the body
R17
*Dec1, sc1* x6 (12 sts)
R18
sc12 sts
Tie
off and leave long end for sewing the body to the head.
Finish
stuffing the body
Legs
(x2)
Working
with yarn in skin color of your choice
R1
sc4 in magic ring (working in continuous rounds)
R2
Inc4 (8 sts)
R3-32
sc30 8sts
Tie
off and leave long end for sewing
Arms
(x2)
Working
with yarn in skin color of your choice
R1
sc4 in magic ring (working in continuous rounds)
R2
*inc1, sc1* x2 (6 sts)
R3-R4
sc6 sts
R5
ch3, sl.st2 (to this chain you have just made – we are making thumb
here), *sc2, inc1* x2 (8 sts)
R6-R25
sc8 sts
Tie
off and leave long end for sewing the arm to the body later
Now
take the legs and hands and wire you have prepared.
Measure
the length from one end to another (for leg and arm) and cut wire in
same length.
Now
use a little bit of stuffing, wrap it tightly on the top of each side
of the wire. You can tighten it with some thread if it will be easier
for you, take the seal tape and start wrapping it around ends,
through the middle, towards the other end, until you have this nice
looking, safe piece, with both ends closed and secured.
Here
is the photo of materials used in my Oopsie doll and how this “stick”
looks like before put into arm or leg.
As
you finish all four of the sticks place them inside the limbs.
Make
another one short though, about 5 cm ( 2 inches) long. This one
make little bit thicker (If the wire is narrow as mine, fold it twice
and twist it a little before wrapping it and making it safe. This
piece we will use for head-body connection so the head doest wobble
around.
Now
you can start sewing the body parts together.
Start
with head and body first.
Place
the “stick” (wire) in the middle of both parts and sew the head
and body nicely through all of 12 stitches. Add some stuffing if
needed.
Legs:
Sew
the legs on the bottom of the body, starting at R2-R6 at each side.
Safety
pin them, check them twice and sew them nicely.
Arms:
Place
arms on the sides of the body. Place them second row below from where
the head and body are sewed together. Sew them through two rows,
nicely. Be aware to place the thumb pointing front.
we
can start working on hair
Hair
In
color of your choice
R1
sc6 in the magic ring (work in continuous round)
R2
Inc6 (12 sts)
R3
*Inc1, sc1* x6 (18 sts)
R4
*Inc1, sc2* x6 (24 sts)
R5
*Inc1, sc3* x6 (30 sts)
R6
*Inc1, sc4* x6 (36 sts)
R7
*Inc1, sc5* x6 (42 sts)
R8
*Inc1, sc6* x6 (48 sts)
R9
*Inc1, sc7* x6 (54 sts)
R10
*Inc1, sc8* x6 (60 sts)
R11
*Inc1, sc9* x6 (66 sts)
R12-R15
sc66 sts
Tie
off and leave long end for sewing the hair to the head.
Ringlets
I
have done mine in pair of two bunches, but then sewed them all
together to look as made in one piece.
You
can do the hair many different ways. You can make ringlets longer or
shorter. You can make them thicker or thinner. You can make them less
or more in numbers.
Lalaloopsy doll 基本人形 式樣叁考:
這是前面的 可愛的手作鉤針人偶娃娃(Deviant Art)欣賞http://stonelearning.blogspot.tw/2015/01/blog-post.html 的基本人形 式樣, 那是要付費的. 這個基本人形 式樣 ,看起來不是很困難, 供參考..
 |
| lalaloopsy doll 基本人形 1 |
 |
| lalaloopsy doll 基本人形 2 |
 |
| lalaloopsy doll 基本人形 3 |
 |
| lalaloopsy doll 基本人形 4 |
 |
| lalaloopsy doll 基本人形 5 |
沒有留言:
張貼留言